Woodworking Dust Collector to Furniture Factory

Woodworking Dust Collector to Furniture Factory has the characteristics of novel structure,small external dimensions,large processing air volume,light weight,and separation for separating dusty airflow containing mixed crushed materials such as wood blocks and sawdust,with low resistance.

The dust collector in the furniture factory has a simple and compact structure,low steel consumption,and higher capture capacity compared to lighter fibrous dust such as sawdust,shavings,asbestos powder,tobacco,etc.

The dust generated by the dust collector in the furniture factory during production is collected by the suction duct,and then enters the woodworking dust collector through the regulating disc valve and inlet duct.The dust is trapped outside the filter bag,and the clean gas is discharged into the atmosphere through the filter bag,induced draft fan,and chimney to meet the standard.

The dust collector in a furniture factory in the furniture factory is transported to the material bin by a scraper ash conveyor,and automatically compacted by a sawdust compactor through the discharge port of the material bin.In response to the hydrophilic characteristics of wood dust and the tendency of dust to agglomerate at certain moisture levels,arching and bridging in the dust collector hopper can lead to material blockage.A vibrator is designed in the dust collector hopper to assist in dust cleaning and reduce the need for manual assistance;In response to the high concentration of wood dust,a gradual airflow channel design is adopted for the dust collector,ensuring even distribution of airflow.Designing the airflow organization to avoid high-speed flushing and wear on local areas inside the dust collector saves maintenance costs for users.

Structure composition of The dust collector in a furniture factory:

1.Shell part:including cleaning room(also known as gas purification box,gas box)and filtering room.Partition partitions,maintenance doors,and shell structures.The cleaning room is equipped with a lift valve,a flower board,and a short spray pipe;The filtering room is equipped with filter bags and their frameworks.

2.Ash hopper and ash unloading mechanism:There are ash hoppers and screw conveyors,air conveying chutes,and rigid impeller feeders(i.e.discharge valves)set up according to different series and dust concentrations.

3.Inlet and outlet air box body:including inlet and outlet air ducts and middle partition.The single(or single row)structure is arranged on one side of the shell,while the double(or double row)structure is arranged in the middle of the shell.

4.Pulse dust cleaning device:including pulse valve,air bag,lifting valve cylinder and its solenoid valve,etc.

5.Compressed air pipeline and its pressure reducing device,oil-water separator,oil mist device,etc.

6.Pillars,vertical cage ladders,and railings.