Single Arm Welding Purifier

The fine dust from the Single Arm Welding Purifier will also slow down after entering the purification system.It enters the filter cartridge through the airflow and is trapped on the surface of the filter cartridge,constantly accumulating.During this process,the wind resistance is also affected by the continuous accumulation of dust.At this time,the control system of the purification system is in a monitoring state through the pressure difference induction system.When the wind resistance reaches the value,the control system automatically turns on the compressed air solenoid valve and blows back to the filter cartridge through the nozzle of the filter barrel to clean the dust.The cleaned dust falls into the smoke collection device below,completing a dust removal and purification process.This process is repeated step by step to form the dust removal power,achieving the purification effect of dust removal.

Working principle of Single Arm Welding Purifier:During the operation of the smoke purification system,the particulate dust enters the purification system through the suction arm.The anti splash spark separation device outside the purification system can block the splashing and large particulate smoke that is buffered in the pipeline and rolling with the airflow,and is directly separated and dropped into the smoke collection drawer below.

Advantages of Single Arm Welding Purifier

1.The practicality and lifespan of the equipment.

2.The design of Siemens motors and fans results in high air volume and good performance of the equipment.

3.Controller design,high performance,conducive to operation and smooth operation of equipment.

4.Polyurethane universal casters provide excellent shock absorption and facilitate the positioning of equipment for arbitrary movement.

5.Single arm welding smoke purifiers can also be designed and manufactured according to customer working conditions,with high adaptability.

6.The noise reduction design and the application of large-area sound insulation materials have achieved the level of equipment noise.

7.Up to three layers of fire-resistant design are used to block large particles of slag,ensuring high performance of the equipment.

8.The suction arm can hover freely 360 degrees,which is conducive to capturing smoke and dust.The stainless steel frame and inlet hose are resistant to high temperatures of 140℃.